Benefits Of Fixing Bent Wheels With Hydraulic Rams

The two-wheel straightening techniques require a thorough inspection before a professional decides. Bent wheels can be dangerous if you leave them to be without getting them repaired. Let’s discuss two of the most important techniques of wheel repair Nashua.

With cold roller technology, the bend is forced out while the wheel is being turned on a lathe by pressing a motorized roller against it. There is no true metallurgy or annealing (heating) involved in this procedure, hence there is an increased chance of the wheel cracking. Due to the inability of most machines to affect the wheel laterally, cold roller technology is thus often limited to radial bends. There are also a few straightening methods that include some sort of lathe, although most of these are either proprietary or secret. 

Hydraulic help entails mounting the wheel on a rack, which centers it and allows for dial gauge readings and subsequent heating. To press out bends in the hot metal, a trained operator utilizes hydraulic rams at various locations on the rack as mechanical aid. Compared to other methods of straightening, this provides several benefits:

• At the molecular level, aluminum alloy has a crystalline inner structure. This crystalline structure can be disrupted when the alloy is bent, undermining the metal's strength at that time. To regain its strength, the alloy has to be heat-treated or annealed.
• Instead of seeing an automated process in action, the operator is in charge of it. A skilled straightener will be able to feel the metal and will frequently be able to determine if the alloy is brittle or soft and whether the wheel is likely to shatter under pressure.
• This device can straighten curves that others cannot since it allows the operator to alter the wheel both laterally and dramatically.
• It is considerably less probable that the alloy will break when put under the pressure needed to straighten the bend by heating the wheel where the damage has to be fixed.
• It is easier for successive impacts to induce the metal to revert, or "snap back," to its previously bent position if the crystalline structure of the wheel isn't annealed. This is because the wheel is weaker where the bend occurred. The manufacturing step of annealing the metal's interior structure is crucial because, according to operators, the metal "retained a memory" of its prior condition.
  

If you're searching for wheel repair Nashua that you can trust, head to KwickRims. They provide a 100 % satisfaction guarantee and have highly skilled specialists available to help you fix any type of wheel damage. Call 603-571-7467 to speak with a representative or visit http://www.kwickrims.com/ for immediate help. To fix the damage and prevent any long-term issues, contact a professional wheel repair service.